AMSOIL 2 Stroke Oil
AMSOIL 2 Cycle Oil Two Stroke Oils provide second-to-none protection and performance in modern two-cycle
Two-cycle engines remain the workhorses in recreational equipment, including outboard motors, motorcycles,
snowmobiles and personal watercraft, as well as in lawn and garden applications like lawn mowers and weed eaters.
Amsoil 2 cycle oil, two stroke oils are the best available today.
Amsoil Saber VS Stihl OEM Oil Test results. AMSOIL Synthetic 100:1 2-Cycle Oils have been providing improved
performance and protection in two-cycle motors since 1973. However, there are still consumers who struggle with the
notion that Saber provides optimum protection at 100:1 when the equipment manufacturer has specifi ed a 50:1 mix
ratio. In order to once again demonstrate the superiority of AMSOIL Synthetic 2-Cycle Oils, AMSOIL provided a
logging company with six Stihl MS 440 chainsaws. Three of the saws were operated using the manufacturerrecommended
two-cycle oil at the recommended mix ratio (50:1). The other three saws had AMSOIL Saber Professional installed at
a mix ratio of 100:1. The loggers used all six saws as they normally would for 200 hours.
Here For the Amsoil Saber VS Stihl Oil story
Snowmobile Product brochure
AMSOIL® Synthetic 2-Cycle Oil
Recommendations Chart <(downloadable
GUIDE <<click for products specifically for you sled.
FIND PRODUCTS TO FIT YOUR SLED.
Enter a year, then select from makes, models and engines for results. Add the products to your cart.
(don't forget the preferred customer membership to save approx
Design changes over recent years have included direct fuel injection engines, in which fuel is
injected directly into the combustion chamber, and exhaust power valves, which improve combustion efficiency at
varying RPM. These design changes have allowed two-cycle engine manufacturers to effectively reduce emissions,
improve fuel efficiency and decrease oil consumption.
Today's two-cycle motors of all types require specialized oil technology to deliver maximum engine
protection, dependable operation and long service life. AMSOIL 2 Cycle Oil Two Cycle Oils
As the leader in two-cycle oil technology, AMSOIL has performed extensive research in developing a
new line of revolutionary, specialized oils called the "Fabulous Four." AMSOIL 2 Cycle Oil Two Cycle
Synthetic 2-Cycle Oil (AIT) was the first new oil to be introduced. It is primarily recommended as
an injector oil or at a 50:1 mix ratio in carbureted, electronic fuel injected (EFI) and direct fuel injected (DFI)
snowmobiles, personal watercraft, motorcycles and ATV's. Formulated with wax-free premium quality synthetic esters
and a specialized additive package, INTERCEPTOR is designed to address the exhaust valve sticking problems
aazociated with certain snowmobile models. New AMSOIL HP Injector Synthetic 2-Cycle Oil (HPI), DOMINATOR Synthetic
2-Cycle Racing Oil (TDR) and Saber Professional (ATP) and Outboard (ATO) Synthetic 100:1 Pre-Mix 2-Cycle Oils
complete the Fabulous Four lineup, replacing AMSOIL Synthetic 2-Cycle Injector Oil, Series 2000 Synthetic 2-Cycle
Racing Oil and 100:1 Pre-Mix Synthetic 2-Cycle Oil, respectively. The application chart Above ranks each oil's
performance in common two-cycle applications.
AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil (AIT) was the first new oil to be introduced. It is
primarily recommended as an injector oil or at a 50:1 mix ratio in carbureted, electronic fuel injected (EFI) and
direct fuel injected (DFI) snowmobiles, personal watercraft, motorcycles and ATV's.
AMSOIL DOMINATOR is recommended for use in high performance stock or modified
two-cycle motors, including air or liquid cooled snowmobiles, personal watercraft, motorcycles (Moto X), ATV's,
go-carts and outboard motors*. Good for use with coated or non-coated pistons, high-octane racing fuels and exhaust
power valves. Compatible with most other two-cycle oils, however, mixing oils should be minimized.
AMSOIL HP Injector is recommended for use in all two-cycle outboard motors including, but not limited to,
Mercury® EFI & Optimax®, Johnson® and Evinrude® FICHT® and E-TEC™, Yamaha® HPDI, Nissan® and Tohatsu® TLDI®,
Suzuki®, Mariner® and Force® . Also recommended for use in all two-cycle personal watercraft and jet boats, as well
as snowmobiles, motorcycles and ATVs.
Use as injection oil or as 50:1 pre-mix (2.6 oz. per U.S. gallon of gas) where NMMA TC-W3 or API TC oils are
specified. Compatible with mineral and synthetic TC-W3 type two-cycle oils, however, mixing two-cycle oils should
If you would like to contact us or have questions or feedback about our products and
services, please send your request using the form below. Feel free to call with your questions.
The information you place on this form will never be sold or used
in a manner other than this to send the information to you.
It's quick and easy to register. Click the link to register as a AMSOIL Preferred Customer 6 month
NO OBLIGATION TO RENEW and YOUR MEMBERSHIP WILL NOT RENEW
IT'S ALL IN YOUR CONTROL AFTER THE TRIAL PERIOD IS OVER.
Amsoil PC & Dealership Information Request form
PRIVACY: “Personal contact information will only be used to provide requested information or assistance.
You will not be enrolled in advertising or marketing programs and your information will not be shared or